More Bike Build

After putting on the crank it was simply bolting everything else into place.

The rear derailer:

 DSC03615_edited-1

DSC03614_edited-1

Front derailer:

DSC03616_edited-1 For the front derailer you have to install so the height is only a few mm above the teeth. To take the guess work out of this Shimano put that little red sticker that you can in the picture. It has little wavy outlines for the teeth and you just adjust the height until they are aligned. 

Front and Rear brakes.

DSC03618_edited-1

DSC03613_edited-1 

And the shifters:

DSC03619_edited-1

DSC03620_edited-1

This phase of the build was very easy it was just bolting things into place and at the correct torque.

The last few steps required a little more thought and tweaking.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s